Cement- X ™

Concrete Remover

 

 

 

·   Dissolves Residues of Cement, Lime, Calcium Carbonate, Concrete

·   Also Effective on Rust Stains, Hard Water Deposits

 

·  Non-HazMat

·  Little to No Fumes

· D.O.T. Non-Regulated

 

 

 

OVERVIEW

Safe-React Cement-X™ is effective on ready-mix trucks, concrete pumping trucks, power trowels, forms, hand tools, mixers, dry-bulk cement trucks, fly ash equipment, and similar applications. Superior results have also been found in other cleaning applications where cement, lime, scale, rust and hard water stains are a problem like pool and spa applications, masonry cleanup, cleaning of tile and grout, etc. Effective and safe in the removal of rust and/or rust stains from most metal parts, concrete, walls, painted and most other hard surfaces.

How & Why Safe-React Cement-X™ Works

Formulated from an organic salt that performs as effectively as an acid or acid mixtures in dissolving or etching calcium carbonate (i.e. cement/concrete). Safe-React Cement-X performs like an acid, yet is non-corrosive (to skin and metal per DOT/OSHA test protocols), non-fuming and is DOT Classified "Non-Regulated". By DOT Standards definition a product is considered Non-Regulated when the corrosion rate on 1020 Carbon Steel does not exceed 6.250 millimeters per year (mmpy). The corrosion rate of Safe-React Cement-X is a mere 0.6379 mmpy.

Applications

Because Safe-React Cement-X™ is such a strong cleaner, always test for compatibility with the surface to be cleaned by applying a small quantity of the product to an inconspicuous area. Can cause flash rusting on unpainted metal at full strength and/or when not rinsed thoroughly. Safe-React Cement-X™ can be used on most industrial surfaces including ready-mix trucks, concrete pumping trucks, power trowels, forms, hand tools, mixers, dry-bulk cement trucks, and fly ash equipment.

 

Use dilution will depend on the deposit character and build up level. This product can be used as received or diluted up to 30:1 with water. Apply solution to unwanted cement and let stand for 2-5 minutes. Rinse thoroughly with pressure washer or hose water. In some cases a second application may be required.   

Available in the Following Concentrated Sizes

                                   5 Gallon         55 Gallon

      

 

 

HMIS  Health: Fire:  0 Reactivity: 1

Appearance: Clear Light Yellow Liquid

pH: <1

Odor: Slight

Solubility: Completely Water Soluble

Specific Gravity: 1.09 +/- 0.02  (9.13 lbs/gal)

Boiling Point: >100°C

Chemical Family: Low pH Salt

Storage: Above 0°C,  Below 50°C

Caution: Keep out of the reach of children.

Regulatory: Not Regulated

Caution: Skin and Eye Irritant.

 

Shield Industries, Inc.  ●  131 Smokehill Lane, Woodstock, GA 30188

Phone: 800 332 6327  ●  Fax 770 517 6863   ●   www.shieldindustries.com

 

MSDS

 

For industrial, institutional, and government product sales information:

Email: info@safe-react.com

For order status, billing, or shipping information:

Email: info@shieldindustries.com

Shield Industries, Inc.
131 Smokehill Lane - Woodstock, GA 30188
(800)332-6327 - (770)517-6869 - Fax (770)517-6863

 www.safe-react.com
www.shieldindustries.com

 

Shield Industries Home|Safe-React Products Home|About Us|Contact Us

Shield Industries, Inc © 2008, All rights Reserved